Home | Contact | Site Map | Policy | Legal
HomeThe Nation's Original Dock Seal Manufacturer
Molded Wheel Chocks
Print this page
Print this page
Chalfant Manual Wheel Chocks are the oldest form of trailer restraints that are required by OSHA. Because OSHA requires wheel chocks for docked trucks or trailers entered by fork trucks they should be included in the dock specifications.

Molded Wheel Chocks
Fabric-reinforced molded rubber; resist weather and offer long service life.
Recommended for compliance with OSHA requirements.
Other applications include the chocking of aircraft, barrels, rolls and trailers.
Optional chain can be added to dock for extra safety and efficiency.
Molded wheel chock measures 9" x 11" x 7" and weighs approximately 10 lbs.
Laminated wheel chocks also available.

OSHA deems it is the owner's responsibility to ensure vehicles are secured at the loading dock by means of wheel chocks or a mechanical vehicle restraint.
Molded Wheel Chock
Molded Wheel Chock In Use.

Connect with us...
Chalfant Sewing Fabricators, Inc.
11525 Madison Avenue
Cleveland, Ohio 44102-2325

Phone: 800.365.0389 (8 am to 5 pm EST)
Fax: 216.521.9922

Brief product selection...
Guardian 3-in-1 Dock Seal System
Series 100 Standard Dock Seal
Series 101 & 103 Curtain Dock Seal
Series 200 & 205 Adjustable Dock Seal
Series 300 "L" Pad Curtain Dock Seal
Series 400 Soft Seal Shelter
Series 500 Rail Shelter
Series 700 Flex Shelter
Series 700 Rigid Shelter
Universal Dock Recovers
Loading Dock Metal Canopy
Chal-Strip Dor-Closures
©2012 Chalfant Sewing Fabricators. All Rights Reserved
Created by GoWebLive.com
Home | Contact | Site Map | Policy | Legal