Home | Contact | Site Map | Policy | Legal
HomeThe Nation's Original Dock Seal Manufacturer
Series H2 Hydraulic Dock Leveler
Print this page
Print this page
Chalfant Series H2 Hydraulic Dock Levelers offers both strength and ease of operation. Single, rotary switch control provides easy activation and recycling of Leveler either when the truck departs or while the truck is at the dock. The hydraulically operated deck and lip provide smooth, efficient operation of the Leveler. Deck and lip are constructed of 55,000 lb. minimum yield steel tread plate. Lip keepers serve as night locks for security and provide safe cross-traffic support when unit is stored. Dock bumpers and grease fittings on lip hinge are standard with each unit.

Deck and lip are constructed of 55,000 lb. Minimum Yield Steel Tread Plate.
Deck support beams are engineered with a Solid Steel Structural C Channel, fully welded to
Full-width Header Plate.
Regenerative Main and Lip Cylinders provide dual-sided lubrication for all hydraulic
seals. Main cylinder is 3 in diameter with a 2 diameter ram.
Extra Heavy Rear Angle with Strategically Placed Gussets provides maximum structural
support and frame strength.
Continuous Hinge Design with Grease Fittings included as standard with each unit.
Molded Bumpers protect dock face and Leveler from truck damage.

Easy Installation
Power is available in 1 ph. (115) or (230) volts; or 3 ph. (208), (230), or (460) volts.
All 60HZ units.
Front and rear Forklift Slots provide easy access for maneuvering and installation.
Side Ports allow unit to be suspended and lowered into pit from dock floor.

Hydraulic system includes an Inline Safety Stop to prevent free-fall in the event the
unit suddenly becomes unsupported.
Power unit is totally enclosed, factory wired, and tested per specifications.
Lip Keepers serve as night locks for security and provide Safe Cross-traffic Support
when unit is stored. Deck tilts to a maximum of 4 from side to side, compensating for
unleveled trucks.
Working Range Toe Guards protect workers from injury during loading and unloading.
Base Frame Support Struts, exclusive to CHALFANT, transfer pull-out forces of
unsupported Leveler into the floor of the pit-making this the strongest and safest Leveler
on the market today!

Hydraulic Dock Leveler Series H2
Hydraulic Dock Leveler Series H2
Deck and Lip
25,000; 30,000; 35,000; 40,000;
and 45,000 lb. Dynamic Capacities

6, 6 6, and 7 Widths
6, 8, and 10 Lengths
(Custom Sizes Available)

Hydraulic: 1 hp., l G.P.M. Hydraulic
simple operationAll operations are rotary-select controlled from a singl, pre-wired Wall Mounted Remote. Leveler can be recycled with the truck in position, or after the truck departs, by turning the rotary switch.

Hydraulic Lip extends after main cylinder raises the platform. Platform automatically descends upon truck departure.

Operating Range of 12" above and 12" below dock.
Frame Supports
Frame Support Struts make our Hydraulic Series the strongest and safest Levelers in the industry today!
Dock Leveler Struts
Structural C Channel offers matchless deck support-providing a 39% greater resistance to elastic bending moments than other industry designs.
Dock Leveler Inline Saftey Stop
Inline Safety Stop guards against free-fall in the event of premature truck departure.
Series H2 Leveler Brochure
Series H2 Leveler Specifications
Series H2 Leveler Submittal
Dock Survey Sheet

Connect with us...
Chalfant Sewing Fabricators, Inc.
11525 Madison Avenue
Cleveland, Ohio 44102-2325

Phone: 800.365.0389 (8 am to 5 pm EST)
Fax: 216.521.9922

Brief product selection...
Guardian 3-in-1 Dock Seal System
Series 100 Standard Dock Seal
Series 101 & 103 Curtain Dock Seal
Series 200 & 205 Adjustable Dock Seal
Series 300 "L" Pad Curtain Dock Seal
Series 400 Soft Seal Shelter
Series 500 Rail Shelter
Series 700 Flex Shelter
Series 700 Rigid Shelter
Universal Dock Recovers
Loading Dock Metal Canopy
Chal-Strip Dor-Closures
©2012 Chalfant Sewing Fabricators. All Rights Reserved
Created by GoWebLive.com
Home | Contact | Site Map | Policy | Legal